Mosaic Surfaces

The surface that you can choose your stones to establish a factor in determining whether your mosaic lasts more than a day. There are tons of possible mosaic bases out there, but take care remains inadequate. Whether wood, concrete, metal, plastic or even choose, you should know that keeping your tiles. The best rule is that if you do not use it prevents!

Wood

Wood is one of the most common mosaic surfaces, because it is so readily available. Govarious markets and find tons of old furniture, screams to be used for the mosaic. You can also search the forms of raw wood in different stores.

You need to prepare the surface before the tile on it. Or you use a mix of Weldbond fifth and 4 / 5 of water or use a latex primer. Cover all sides and edges of the untreated wood, to protect it from deformation. If the wood has a polyurethane coating will serve only as a bit 'to wear so that the glue holdsbetter.

There are several types of glue that can be used on a wood surface. Some of the most common are Weldbond, Liquid Nails and thinset mortar, just to name a few. You can also use any type of stone on that surface. Grout and seal as usual.

Concrete

A concrete step stone, bench or table are some of the most common forms of concrete block used in the mosaic. There is no need to seal a concrete form, although it is porous. Just be sureto be used for mortar thin paste. It 's the best glue to the concrete surface. If you are using to Weldbond, you have the stone seals with the mixture of the above.

pieces of concrete are open until you use thinset. You can put this in your garden in any environment. The only drawback is that these are very difficult. But this can be a plus for a mosaic, you stay in place in case of bad weather.

Another form ofConcrete is a governing board support or concrete Hardi Backer or Permabase. These are ideal for large murals. This card can also be used for external projects. Consider the stretch drive before your tiles, as too thin to nail or screw to install.

Terra Cotta

A clay pot is a beautiful mosaic ready for your patio. Remember that clay is highly absorbent. You have to completely seal off the interior and exterior. ThinsetLiquid nails or glue is the best for this area. They can withstand the additional moisture that the soil can be introduced into the planter.

A useful tip for those tiles would be to place it in around or put it on the head during the process of mosaic. There is really no need to tile the bottom though.

Glass

Glass is very popular because it is so readily available. You can find this information in the form of pots and pans. It 's a bit more difficult to add stones to a glassVase. The tiles tend to slip slightly. You have to glue or Liquid Nails Silicone you.

A beautiful votive cup, you must use a transparent adhesive and the cathedral of glass. Cover the back of the tile, so that you can not see through the tile adhesive.

Other land

There are many other areas available for use. Ceramic tiles, acrylic, metal and fiberglass are great bases for mosaic. You just need the right glue and useSurface preparation for all.

Definite No

When you put the mosaic on the wrong side, then it will not last long. If the surface and then bend your tile opening. If you want something that will disintegrate the brick as baskets then you'll end up having problems. So make sure you secure in your choice of surface.

Create a mosaic that is not always easy. You have homework and check all the possibilities of success and failure.